Home | Products | ISPM15 | Links | Contact | Presswood Pallets

Products & Services - Below are a few examples of our work


Plywood Batten Round Cases

This is one of the most common export packing cases that we manufacture. It is constructed of 8mm exterior grade plywood with 16 X 75mm battens. In some cases it may have 25 X 100mm battens and a 50 X 75mm framed base depending on the weight of the item.



Example One | Example Two | Example Three |


Example One

The collapsible case with a riveted metal edged envelope is great for storage purposes and makes an ideal small but very strong packing case. This case is normally used for one off shipments.



Example Two

We also manufacture the Transit Case, which is another Metal Edged Type of case that can be used for repeat transportation. Again this is another very strong case that can be easily expanded and stored very efficiently.

This case is not really suited to one off shipments


Example Three

Acorn Packaging Services Limited were asked to manufacture cases (as seen in the

picture to the right) which would support the two halves of a turbine rotor after refurbishment, therefore enabling the customer to export them.

The larger Turbine Rotors which can weigh up to 100 Ton have to be shipped whole. The only way to transport these is on a set of Turbine Stands as pictured below. These comprised of two end stands and one centre support.  This enables the rotor to be transported for refurbishment without the removal of the buckets.

We also specialize in manufacturing cases for turbine rotor components.             

Acorn Packaging Services create all our products to order, hence there is no such thing as a standard case. Anyone who says there is, will not be packing your item correctly. Would you want your precious motorbike going abroad in an ill fitting case.

This is why we make sure everything is perfect, if the item is not protected by the case then why do you need a case.